Fujikura Fiber Fusion Splicer FSM-62S

The Fujikura 62S provides active core alignment splice loss performance while utilizing a conventional wind protector and tube heater design. An alternative to the fully automated core-alignment model 70S, the 62S includes an auto-start feature for both the splicing and tube heating process that minimizes the steps necessary to process splices. With a shrink time of 23 seconds with standard splice sleeves, the 62S ensures a high level of productivity. Incorporating the proven ruggedized features pioneered by Fujikura, durability is greatly enhanced by a mirrorless optical system and "severe- impact resistant" monitor. Battery capacity is 200 splices/shrinks. The transit case doubles as a built-in or mobile workstation and makes splicing easier than ever.

Fujikura Fiber Fusion Splicer FSM-62S

Specification

The Fujikura 62S provides active core alignment splice loss performance while utilizing a conventional wind protector and tube heater design. An alternative to the fully

automated core-alignment model 70S, the 62S includes an auto-start feature for both the splicing and tube heating process that minimizes the steps necessary to process splices. With a shrink time of 23 seconds with standard splice sleeves, the 62S ensures a high level of productivity. Incorporating the proven ruggedized features pioneered

by Fujikura, durability is greatly enhanced by a mirrorless optical system and “severe- impact resistant” monitor. Battery capacity is 200 splices/shrinks. The transit case

doubles as a built-in or mobile workstation and makes splicing easier than ever.

Key Features

  • 5,000 splices electrode life
  • 23 second tube heating time with standard sleeves
  • Fully ruggedized for shock, dust and moisture
  • Li-ion battery with 200 splices/shrinks per charge
  • 5 mm cleave length for splice on connector or small package needs • Sheath clamp or fiber holder operation
  • Internet software upgrades
  • Multi-function transit case with integrated workstation

 

Specifications

PARAMETER                        VALUE

Model                                      62S Fusion Splicer

Applicable Fibers               Single-mode (G.652 and G.657), Multimode (G.651), DS (G.653), NZDS (G.655)

Cladding Diameter              80 μm to 150 μm

Coating Diameter                100 μm to 1,000 μm

Fiber Cleave Length           5 to 16 mm

Typical Average Splice Loss              0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T standards Splicing Time                               ULTRA FAST mode — 6 seconds; SM FAST mode — 7 seconds; SM AUTO mode — 10 seconds with SM fiber

Arc Calibration Method      Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available

Splicing Modes                        100 preset and user programmable modes

Splice Loss Estimate              Based upon dual camera core axis alignment data

Storage of Splice Result        Last 10,000 results stored in the internal memory

Fiber Display                             X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation

Magnification                            320X for single X or Y view, or 200X for X and Y view

Viewing Method                       Dual cameras with 4.7 inch TFT color LCD monitor

Operating Condition               0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively

Mechanical Proof Test            1.96 to 2.25N

Tube Heater                                Built-in tube heater with 30 heating modes; auto-start function

Tube Heating Time                   Typical 23 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves,                                                                             

Protection Sleeve Length      60 mm, 40 mm, micro

Splice/Heat Cycles with Battery           Typical 200 cycles with power save functions activated

Electrode Life                            5,000 Arc Discharges

Power Supply                            Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8  V DC with BTR-09 battery

Terminals                                   USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03

Wind Protection                      Maximum wind velocity of 15 m/s (34 mph)

Dimensions                               146 W x 159 D x 150 H (mm) / 5.75 W x 6.25 D x 5.9 H (inches)

Weight                                         2.5kg (5.5 lbs) with AC adapter ADC-18: 2.7kg(5.95 lbs) with BTR-09 battery

 

Shenzhen Neofibo Technology Limited was founded in 2008, locates Shenzhen China. Neofibo has dedicated to become the professional supplier for fiber optic polishing solutions and aims to make our customers’ fiber connectivity more reliable.

During last 14 years, we have been comprised of a group of experienced fiber optic professionals in areas of connector polishing and assembling, outside plant installation, transmission system, datacom, CATV and testing. Neofibo could provide products and service for you, whether you are fiber optic scientist working in multi-gigabit, DWDM, EDFA applications, maintenance engineer  for optical connecting system, an outside plant contractor providing splicing and testing, a datacom manager who works in multimode-to-single mode conversion or you are an optical fiber component manufacturer who needs lots of high quality pigtails, consumables and tools, you can count on us to offer you the verified solution.

Neofibo is focusing on the field of fiber optic polishing solutions.

We specialize in manufacturing fiber optic polishing machine, design various optical fiber connectors polishing fixtures, provide completed polishing process and materials for all kinds of fiber optic connectors.

Neofibo could provide the whole sets of production equipments for fiber optic patch cord, such as fiber optic polishing, end face inspection microscope, functional inspection and detection, raw materials as fiber optic cables and fiber connectors, processing tools and cleaning consumables.

Neofibo can provide not only products, but also technical services and R & D support.

Neofibo should be your partner forever.

 

 

 

 

 

 

 

 

 

 

What does NEOFIBO offer?

We offer full range of quality and comprehensive fiber optic products, including Patchcord Production Machine, polishing jigs, as Seikoh Giken, Senko, Domaille or customized ones; Polishing Consumables, Tools, Cleanings, Tool Kits, Testing Equipment, Splice Items. We commit to offer you Attractive Price, Excellent Quality and Fast Delivery!

What will be the delivery cost?

All price listed are FOB Shenzhen. Your nominated courier is acceptable. Otherwise, we will use FEDEX, DHL, UPS or any other forwarder per confirmation and charge accordingly.

How the goods will be delivered?

For normal stock items, they will be dispatched within 1-2 business days after payment confirmation. However, for items out of stock, estimated leadtime will be 3-10 working days.

How can I order the goods?

Neofibo is pleased to offer our valuable customers three ordering channels.  e.g.:  Online Ordering, Fax Order Form and Issuing Formal Purchasing Order by mail.

How is the warranty for NEOFIBO product?

All products are warranted by NEOFIBO (consumables, normal tear and wear excluded) for one year after date of purchase. Any part defected in material or workmanship and returned to NEOFIBO, as NEOFIBO designates, shipping costs prepaid, will be, as the exclusive remedy, repaired or replaced, at NEOFIBO’s option.

contact_neofibo

Send Inquiry

CAPTCHA image
email to us Skype contact us

WeChat